Research On The Lubrication Of Roller Conveyor Sprocket And Bearing Maintenance
Oct 27, 2020
What I shared with everyone today is the detailed explanation of the problems related to the smoothness of the sprocket of the roller conveyor and the care and use of the bearing. I hope to help everyone.
1) Dust-free oil injection: If the essential conditions permit, an oil injection joint should be installed on the slower and other smooth parts to ensure that the injected smooth oil reduces or eliminates dust and dirt and ensures the cleanness of the oil.
2) The correct smooth roller conveyor (nickname: roller line) must have no accumulations on all the transmission parts, and uniquely cannot have iron filings, iron wires, ropes, plastic films and other debris. If these devices exist, they will overheat. It will affect the life of bearings, gears and chains. The moving parts of the remaining conveyors are not smooth or poorly smooth, which is easy to cause excessive wear of the track or the bearing. Therefore, it is necessary to select the appropriate lubricating oil and the correct design structure and lubricating technique for the correct smoothing. Correct smoothing is important for the high efficiency of the conveyor and the normal operation of the turtle.
3) Normally check whether the various parts of the drum are stuck. If there is any stuck, stop the operation and deal with it immediately.
4) After the roller conveyor has been running for 10-20 minutes, check the operating conditions of each rotating part, whether each bearing has abnormal noise and fever, and whether the bearing rotates smoothly and without bounce.






